UV DTF Cup Wrap Transfer For 16oz Can - NFL 32 Team Libby Tumbler Decal KA-4271

UV DTF Cup Wrap Transfer (Permanent Waterproof Decal for Drinkware)

UV DTF Cup Wrap Transfer is a ready-to-apply permanent waterproof decal for customizing drinkware. This UV DTF transfer decal bonds to smooth hard surfaces and creates a glossy, professional finish—no heat press, no weeding, and no laminating required.

Works Great On These Smooth Hard Surfaces

• Glass cups (including many can-style cups)
• Tumblers
• Plastic cups (smooth, non-textured)
• Acrylic surfaces
• Metal cans / coated drinkware
• Ceramic mugs

Each decal is printed with white ink backing, making it suitable for both light and dark surfaces. If you’re looking for an easy peel and stick cup wrap that looks like a professional custom print, UV DTF is a top choice.

Key Features (UV DTF Decal Benefits)

• ✔ Waterproof (hand wash recommended)
• ✔ Scratch resistant for everyday use
• ✔ Strong permanent adhesive on smooth surfaces
• ✔ Vibrant high-resolution print
• ✔ 3D raised / glossy effect for a premium look
• ✔ Ready-to-apply cup wrap transfer decal

Care Note: UV DTF decals are durable, but avoid high-heat dishwasher cycles. Excessive heat may cause lifting or edge peeling over time.

How to Apply UV DTF Transfer (Cup Wrap Decal Instructions)

Follow these steps for a smooth, bubble-free application and a long-lasting finish:

Step 1 – Clean & Prep the Surface

Wash your cup or tumbler with warm soapy water and dry completely. Many glass can cups have an invisible oil coating from manufacturing—cleaning is critical for proper adhesion.

Step 2 – Align and Position the Cup Wrap

Carefully align the UV DTF cup wrap transfer on your cup. Lightly tack it in place, then press from the center outward to push out air bubbles.

Step 3 – Peel the Carrier Sheet Slowly

Slowly peel back the clear carrier sheet at a steady angle. Do not rush—peeling too quickly can stretch the decal or lift edges.

Step 4 – Smooth & Secure for a Permanent Bond

Use your fingers or a scraper tool to smooth the decal from the center toward the edges. Apply firm, even pressure to ensure full contact.

Step 5 – Final Check

Inspect for bubbles or wrinkles. Once applied, your permanent UV DTF transfer decal is ready to use.

Product Details

• Product Type: UV DTF Cup Wrap Transfer
• Material: UV DTF Permanent Transfer Decal
• Finish: Glossy / Raised 3D Effect
• Adhesive Type: Permanent pressure-sensitive adhesive
• Designed to fit: 16oz Libbey Can Glass
• Size: 24cm (L) × 11cm (H)

Compatibility Disclaimer: You may apply this decal to other smooth hard surfaces at your discretion. We do not guarantee results on blanks other than the specified size.

FAQ (UV DTF Cup Wrap Transfer)

Do UV DTF transfers require a heat press?

No. UV DTF cup wrap transfers are peel and stick decals and do not require a heat press.

Are UV DTF decals waterproof and permanent?

Yes. UV DTF decals are waterproof and designed to be permanent on smooth hard surfaces. Hand washing is recommended for best long-term adhesion.

Will this fit my cup?

This wrap is designed to fit a 16oz Libbey can glass (24cm × 11cm). For other cup shapes and sizes, placement and fit may vary.

Can I apply UV DTF decals on plastic or acrylic?

In many cases, yes—UV DTF decals can adhere to smooth plastic and acrylic. We recommend testing on your specific blank surface for best results.

Is it dishwasher safe?

We recommend hand wash only. Avoid high-heat dishwasher cycles, as heat can weaken adhesion and cause lifting over time.

How do I prevent bubbles during application?

Clean the surface thoroughly, align carefully, and press from the center outward. Use a scraper tool or firm finger pressure to secure edges and remove trapped air.